From: Steven Weber (itweber@xxxxxxxxxxxxx)
Date: Fri Feb 22 2002 - 14:01:35 GMT-3
virtual token ring interfaces are not configured on Ethernet they are their
own config, just like using a loopback. just do virtual token-ring 0 in
global config mode
----- Original Message -----
From: "Tshon" <tshon@netzero.net>
To: "danyye" <danyye@yeah.net>
Cc: <ccielab@groupstudy.com>
Sent: Friday, February 22, 2002 11:37 AM
Subject: Re: how configure a vitual token ring on ethernet interface
> try cisco press IBM networks.
>
> source-group ring-group 100 (this makes a virtual ring)
> source-group 100 70 1 10
>
> ethernet 0
> bridge-group 10
>
> token 0
> source-group 8 1 100
>
> this says that token 0 is in ring 8 bridge 1 and should place the source
> route
> the traffick to ring 100.
>
>
> the global portion says that virtual ring 100 (same as everywhere above)
> should source route the traffick to pseudo ring 70... you will not find a
> pseudo ring anywhere that references the 70.... it represents the
> brigde-group 10
> .....bridge 1.
>
> danyye wrote:
>
> >hi:
> >how configure a vitual token ring on ethernet interface,where find some
> >more configuration?
> >danyye
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:30 GMT-3