From: Zwaanswijk, John (John.Zwaanswijk@xxxxxxxxxxxxx)
Date: Fri Feb 22 2002 - 05:33:56 GMT-3
To remove the dynamic map:
In interface configuration
no frame-relay inverse-arp (disable to create dynamic maps)
In exec mode
clear frame-relay inarp (to remove already created dynamic mappings)
John
-----Original Message-----
From: Sandro Ciffali [mailto:sandyccie@yahoo.com]
Sent: donderdag 21 februari 2002 19:16
To: ccielab@groupstudy.com
Subject: no Frame-relay inverse arp
My all the practise so far tells me, The best way to
configure the frame map without dynamic maps is to
shut all the frame interfaces, configure them one by
one, The bring up all the spokes first and finaly
bring the hub up.
Out of 20 times i did this 17 times i did not get
dynamic map (the 0.0.0.0 dlci mappings), But three
times i still got them.
Whenever i got these dynamic maps, The only way to
remove them out was to remove frame config fromthe
interface, shut it down and reboot all the router in
the frame cloud.
Am i doing right thing here??? Or is it the way it is
supposed to be?
Thanks in advance
sandro
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:30 GMT-3