From: Chua, Parry (Parry.Chua@xxxxxxxxxx)
Date: Thu Feb 21 2002 - 22:09:09 GMT-3
Hi,
This what I think in theory, static route remain static unless it is
specify to redistribute
to other dynamic routing protocol.
> Parry Chua
-----Original Message-----
From: Tshon [mailto:tshon@netzero.net]
Sent: Friday, February 22, 2002 2:34 AM
To: George Spahl
Cc: ccielab@groupstudy.com
Subject: Re: IP RIP default-routing
George I am not able to confirm in any other ios, but I have received
the same.
George Spahl wrote:
>Greetings,
>
>I've long been under the impression that by simply adding a static 0/0
>route that RIP would automatically include it in outgoing routing
>updates, however I'm only able to make that happen by "redistributing
>static". (Default information originate works fine also). I've
reduced
>it to a very simple config but get the same results. Also, the network
>that the 0/0 route points to is in RIP as well (if that makes a
>difference. Has the behavior changed for this (or maybe never behaved
>this way at all)? Version is 12.1. Didn't expect to get hung up on IP
>RIP...
>
>George
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:30 GMT-3