From: David Ham (David.Ham@xxxxxxxxxxxx)
Date: Thu Feb 21 2002 - 21:14:07 GMT-3
Hi
I am using
access-list 200 permit 0xF0F0 0x0101 ---> Netbios
access-list 200 permit 0x0000 0x0D0D ---> SNA
access-list 200 permit 0xE0E0 0x0101 ---> IPX
David Ham
-----Original Message-----
From: alain faure [mailto:alainfaure@yahoo.fr]
Sent: Monday, 18 February 2002 2:04
To: Ahmed Mamoor Amimi; ccielab@groupstudy.com
Subject: Re: access-expression
Hello,
See it too, but if you at :
http://www.cisco.com/warp/public/698/acl200.html
it seemes that you can selecte SNA by
access-list 200 permit 0x0000 0x0D0D
I don't knoow what to think about
and what about ipx ?
Best regards
--- Ahmed Mamoor Amimi <mamoor@ieee.org> a icrit : > I got my answer at :
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ibm_
c
> /bcprt1/bcdsrb.htm#xtocid1735747
>
> some last example..... both are true mine and cisco one... the obove one
was
> cisco and below was mine. this is another way to hold ur ear.
>
> -Mamoor
>
> ----- Original Message -----
> From: Ahmed Mamoor Amimi
> To: ccielab@groupstudy.com
> Sent: Sunday, February 17, 2002 6:02 PM
> Subject: access-expression
>
>
> "Pass the frame if it is a NetBIOS frame or if it is an SNA frame destined
to
> address 0110.2222.3333."
> ONE WAY to configure the above pharse
> interface tokenring 0
> access-expression in ~lsap(202) | dmac(701)
> !
> access-list 202 permit 0x0404 0x0001
> access-list 202 permit 0x0004 0x0001
> access-list 701 permit 0110.2222.3333
>
> SECOND WAY
> interface tokenring 0
> access-expression out (lsap(200) | (dmac(700) & lsap(201))
> access-list 200 permit 0xF0F0 0X0101
> access-list 201 permit 0x0000 0x0D0D
> access-list 701 permit 0110.2222.3333 0000.0000.0000
> need confirmation that the access-expression is the same both way.
>
> -Mamoor
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:30 GMT-3