From: Brett Lewis (blewis@xxxxxxxxxxx)
Date: Thu Feb 21 2002 - 20:04:40 GMT-3
Have you tried the configuration in a dialer pool scenario? You could try
the command 'dialer pool-member 1 min-links 1 max-links 2' under the bri. It
probably won't make any difference but hey it's worth a try!
Brett
----- Original Message -----
From: "michael robertson" <michael_w_2ca@yahoo.ca>
To: <ccielab@groupstudy.com>
Cc: "Peter Dostal" <pdostal@724.com>
Sent: Thursday, February 21, 2002 12:32 AM
Subject: RE: shy second ISDN B channel doesn't come up??
> HI, There,
>
> Actually I tried everything. I used extended ping. BY
> default the router use dialer load-threshold 1
> outbound. THen I change it to either, it doesn't work,
> then I use fast-rollover-delay 1, then the second
> channel comesup. But the problem is that as long as
> the second channel come up, then it comes down again.
>
> Any idea about this ??
>
> regards
>
> michael
>
>
> --- Peter Dostal <pdostal@724.com> wrote:
> > This might help when you use Nortel switches: isdn
> > fast-rollover-delay
> >
> > Peter
> >
> > -----Original Message-----
> > From: michael robertson
> > [mailto:michael_w_2ca@yahoo.ca]
> > Sent: Wednesday, February 20, 2002 4:57 PM
> > To: ccielab@groupstudy.com
> > Subject: shy second ISDN B channel doesn't come up??
> >
> >
> > Hi, Group,
> >
> > I am doing ISDN scenario, and the second B channel
> > never comes up. I am using 2 3620 routers with ios
> > version: 12.2(2)T.
> >
> > Am I missing something?
> >
> > Any help will be greatly appreciated
> >
> >
> > regards
> >
> >
> > michael
> >
> >
> > r1#sh run int bri0/0
> > Building configuration...
> >
> > Current configuration : 388 bytes
> > !
> > interface BRI0/0
> > ip address 172.20.10.1 255.255.255.0
> > encapsulation ppp
> > dialer idle-timeout 90
> > dialer map ip 172.20.10.2 name r2 broadcast #3
> > dialer map ip 172.20.10.2 name r2 broadcast #4
> > dialer load-threshold 1 outbound
> > dialer-group 1
> > isdn switch-type basic-dms100
> > isdn spid1 #1
> > isdn spid2 #2
> > ppp authentication chap
> > ppp multilink
> > end
> >
> >
> > --***************************
> >
> > r2#sh run int bri 1/0
> > Building configuration...
> >
> > Current configuration : 388 bytes
> > !
> > interface BRI1/0
> > ip address 172.20.10.2 255.255.255.0
> > encapsulation ppp
> > dialer idle-timeout 90
> > dialer map ip 172.20.10.1 name r1 broadcast #1
> > dialer map ip 172.20.10.1 name r1 broadcast #2
> > dialer load-threshold 1 outbound
> > dialer-group 1
> > isdn switch-type basic-dms100
> > isdn spid1 #3
> > isdn spid2 #4
> > ppp authentication chap
> > ppp multilink
> > end
> > ***********************
> >
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:30 GMT-3