From: Williams, Glenn (WILLIAMSG@xxxxxxxxxxxxx)
Date: Thu Feb 21 2002 - 14:50:57 GMT-3
How would you do that on a multipoint interface with inverse-arp turned off?
Unless you are talking about multiple point-to-point interfaces, then yes,
frame-relay interface-dlci will work.
GW
-----Original Message-----
From: jim.phillipo@guardent.com [mailto:jim.phillipo@guardent.com]
Sent: Thursday, February 21, 2002 11:40 AM
To: ccielab@groupstudy.com
Subject: Frame map vs intfc DLCI
I see on a lot of practice labs they use mapping more often than not on
multipoint interfaces. They do not specify which to use. Is it not easier
to use the interface DLCI command or am I missing something here ?
Jim Phillipo, CCNP, CCDP
Sr. Internetworking Engineer
W: 401.456.1821 F: 401.456.0599 M: 781.983.0316
90 Royal Little Drive, Providence, RI 02904
www.guardent.com
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:29 GMT-3