From: michael robertson (michael_w_2ca@xxxxxxxx)
Date: Wed Feb 20 2002 - 22:01:47 GMT-3
HI, There,
Actually I tried everything. I used extended ping. BY
default the router use dialer load-threshold 1
outbound. THen I change it to either, it doesn't work,
then I use fast-rollover-delay 1, then the second
channel comesup. But the problem is that as long as
the second channel come up, then it comes down again.
Any idea about this ??
regards
michael
--- Peter Dostal <pdostal@724.com> wrote:
> This might help when you use Nortel switches: isdn
> fast-rollover-delay
>
> Peter
>
> -----Original Message-----
> From: michael robertson
> [mailto:michael_w_2ca@yahoo.ca]
> Sent: Wednesday, February 20, 2002 4:57 PM
> To: ccielab@groupstudy.com
> Subject: shy second ISDN B channel doesn't come up??
>
>
> Hi, Group,
>
> I am doing ISDN scenario, and the second B channel
> never comes up. I am using 2 3620 routers with ios
> version: 12.2(2)T.
>
> Am I missing something?
>
> Any help will be greatly appreciated
>
>
> regards
>
>
> michael
>
>
> r1#sh run int bri0/0
> Building configuration...
>
> Current configuration : 388 bytes
> !
> interface BRI0/0
> ip address 172.20.10.1 255.255.255.0
> encapsulation ppp
> dialer idle-timeout 90
> dialer map ip 172.20.10.2 name r2 broadcast #3
> dialer map ip 172.20.10.2 name r2 broadcast #4
> dialer load-threshold 1 outbound
> dialer-group 1
> isdn switch-type basic-dms100
> isdn spid1 #1
> isdn spid2 #2
> ppp authentication chap
> ppp multilink
> end
>
>
> --***************************
>
> r2#sh run int bri 1/0
> Building configuration...
>
> Current configuration : 388 bytes
> !
> interface BRI1/0
> ip address 172.20.10.2 255.255.255.0
> encapsulation ppp
> dialer idle-timeout 90
> dialer map ip 172.20.10.1 name r1 broadcast #1
> dialer map ip 172.20.10.1 name r1 broadcast #2
> dialer load-threshold 1 outbound
> dialer-group 1
> isdn switch-type basic-dms100
> isdn spid1 #3
> isdn spid2 #4
> ppp authentication chap
> ppp multilink
> end
> ***********************
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:29 GMT-3