From: Brian (signal@xxxxxxxxxx)
Date: Wed Feb 20 2002 - 02:36:06 GMT-3
I have a few new 16MB ISA Flash cards if anyone is looking to build some
Frankenpix's, or upgrade a lower pix so it can run 6.x.
With 2MB Flash you can run up to 5.1
With 8MB Flash you can run up to 5.2 and up
The new 16MB ISA Flash cards are $650/ea
I also have a nice PIX Classic (2MB Flash) that will run 5.2 real nice,
and has 2 interfaces in it, for $800.00.
I do not build Frankenpix's myself (homebrewed pix's, pc
motherboard/processor with a Cisco ISA Flash Card), however, it has been
posted here many times on how to do it. Generally getting your hands on
the PIX Flash cards is the difficult part.
Q. How do I determine how much flash memory my PIX has?
A. If you perform a show version command on your PIX, and the flash size
is not given in MB, then use the table below to see how much flash your
PIX has.
i28F020 512 KB
AT29C040A 2 MB
atmel 2 MB
i28F640J5 8 MB - PIX 506
16 MB - all other PIXes
strata 16 MB
-----------------------------------------------
Brian Feeny, CCIE #8036 e: signal@shreve.net
Network Engineer p: 318.222.2638x109
ShreveNet Inc. f: 318.221.6612
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:28 GMT-3