From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Wed Feb 20 2002 - 01:56:40 GMT-3
FACT :
If u enable frame-relay fragmentation that is the option of 12.1
(FRF.12) on one router then other router
should also run 12.1 so it can automatically adapt frame-relay fragmentaion
FRF, if it is not then there will
be no PVC between them as the router run old code dont know how to defrag it
and will drop the circuit packets.
If u set frame-relay "end-to-end" keepalive timer then it should
be set on both side for the PVC to maintain.
it will show like this :
DLCI = 104, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE (EEK UP), INTERFACE =
Serial0
In this line u will notice there is an addup thing that is EEK UP : that is
end-to-end keepalive is up
-Mamoor
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:28 GMT-3