From: ccie candidate (ccie1@xxxxxxxxx)
Date: Tue Feb 19 2002 - 14:33:00 GMT-3
guys ;
here are my router output ,someone tells me if i still need to update my bootro
m or not .
is the bootRom is a kind of software or hardware upgrade .
also i have another problem which is i have some modules makes my router compet
ely without response ie the console doesnt send anything once i install this mo
dule .
your answer is highly appreciated .
thx
------------------------------------------
System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1
)
Copyright (c) 1986-1998 by cisco Systems
2500 processor with 16384 Kbytes of main memory
%Error: System flash bank 0 chip 1 unknown, chip id 0xFFEF (reversed = 0xFFF7)
%Error: System flash initialization failed
# show version
cisco 2500 (68030) processor (revision A) with 16384K/2048K bytes of memory.
Processor board ID 01063798, with hardware revision 00000000
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Cisco-ET Extended Temperature platform.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of System flash (Device not programmable)
//note that the device not programmable
#show flash chips
8192K bytes of System flash (Device not programmable)
Chip Bank Code Size Name
1 1 01AD 2048KB AMD 29F016
2 1 0000 2048KB Unknown Chip
3 1 01AD 2048KB AMD 29F016
4 1 01AD 2048KB AMD 29F016
//note the unknown chip
---------------------------------------------------------
--On Tue, 19 Feb 2002 22:02:40 Ahmed Mamoor Amimi wrote: >Ur ROM - IOS is old..... ugrade ur ROM and this message will vanish if ur >both flash sticks are in working >condition. > >-Mamoor >----- Original Message ----- >From: ccie candidate <ccie1@lycos.com> >To: <ccielab@groupstudy.com> >Sent: Tuesday, February 19, 2002 2:50 PM >Subject: 2500 flash problem > > >> hi guys ; >> i have a bad problem with upgading my flash memory on some of the 2500 >series routers >> i have searched the archive however no clear answer is there . >> >> >> the problem is that when i insert 2x8MB flash to my routers , first the >router give a message that >> " it cannot intialize the flash " bank 1 is unknown or something like that >> >> some of the flash i insert make the router completely without respose > nothing comes out of the console ) >> >> >> >> >> some of them after rebooting to bootrom they appear as (device not >programmable) >> >> >> >> does anyone had this problem before . >> >> >> may be the module are faulty ??? >> >> >> when i make show flash chips some of the chips appear as unknown !! >> >> any help will be appreciated . >> >> >> >> ccie candidate >> >> >> Check out Cupid School where you will learn from Matchmaker's >> best and brightest. Good Luck! >> >> http://ecard.matchmaker.com/cupid0202/cupid0202.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:27 GMT-3