Re: access-expression

From: alain faure (alainfaure@xxxxxxxx)
Date: Sun Feb 17 2002 - 11:09:47 GMT-3


   
hello;

i think only the second respond to the phrase because in the first you will
have SNA traffic for other than 0110.2222.3333

best regards

 --- Ahmed Mamoor Amimi <mamoor@ieee.org> a icrit : > "Pass the frame if it is
a NetBIOS frame or if it is an SNA frame destined to
> address 0110.2222.3333."
> ONE WAY to configure the above pharse
> interface tokenring 0
> access-expression in ~lsap(202) | dmac(701)
> !
> access-list 202 permit 0x0404 0x0001
> access-list 202 permit 0x0004 0x0001
> access-list 701 permit 0110.2222.3333
>
> SECOND WAY
> interface tokenring 0
> access-expression out (lsap(200) | (dmac(700) & lsap(201))
> access-list 200 permit 0xF0F0 0X0101
> access-list 201 permit 0x0000 0x0D0D
> access-list 701 permit 0110.2222.3333 0000.0000.0000
> need confirmation that the access-expression is the same both way.
>
> -Mamoor



This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:25 GMT-3