From: Rthugo1@xxxxxxx
Date: Sat Feb 16 2002 - 12:03:49 GMT-3
In a message dated 2/12/2002 9:12:22 PM Central Standard Time,
greggm@sbcglobal.net writes:
> Subj:Auth Problem w/ RIP V2
> Date:2/12/2002 9:12:22 PM Central Standard Time
> From: greggm@sbcglobal.net (Gregg Malcolm)
> Sender: nobody@groupstudy.com
> Reply-to: <A HREF="mailto:greggm@sbcglobal.net">greggm@sbcglobal.net</A> (Gre
gg Malcolm)
> To: ccielab@groupstudy.com
>
> I would config in this order :
*interfaces
*key chain
*turn up interfaces
*routing protocol
My .02c,
Rob H
>
> I'm experiencing a problem with MD5 auth and RIP v2. I've config'ed NTP
> between to 2 routers that I'm using to test RIP V2 auth. Both routers have
> key chains and identical accept and send start and infinite end times. Both
> also have 'ip rip auth mode MD5' and ip rip auth key-chain text' configured.
> Debug of 'ip rip' returns "invalid authentication" message. Can't find any
> additional debugs to shed more light on the problem.
>
> Has anyone experienced this ? Does it matter if the key chain is config'ed
> before the int cmds?
>
> Any help appreciated.
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:25 GMT-3