From: Carolyn Camarda (ccamarda@xxxxxxxxxxxxx)
Date: Fri Feb 15 2002 - 15:10:40 GMT-3
Just ran in to the same issue on a call back scenario. My problem was
because I didn't have ppp auth chap on the called router.
----- Original Message -----
From: "Brett Lewis" <blewis@3net-uk.com>
To: <ccielab@groupstudy.com>
Sent: Friday, February 15, 2002 11:08 x
Subject: ISDN Dialer pools
> Group,
>
>
>
> I have an interesting problem using a single BRI interface and two
> dialer interfaces. If I configure a router to dial two separate
> locations it works fine. If I then dial into that same router from one
> of the remote locations I get an Incoming call rejected, unbindable
> error. Has anybody got a solution to get around this?
>
>
>
> Many Thanks
>
>
>
> Brett Lewis
>
> ------------------------------------------------------------------------
> ------------
>
> The information transmitted in this e-mail is intended only for the
> person or entity to which it is addressed and may contain confidential
> and/or privileged material. Any views, statements or opinions hereby
> expressed may not represent those of 3net. If you are not the intended
> recipient, please be advised that you have received this e-mail in error
> and that any use, dissemination, forwarding, printing or copying of this
> e-mail is prohibited. If you received this in error, please contact the
> sender immediately and delete the material from any computer.
>
> ------------------------------------------------------------------------
> ------------
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:24 GMT-3