From: Jeremy Laurenson \(Cisco\) (jlaurens@xxxxxxxxx)
Date: Fri Feb 15 2002 - 14:47:06 GMT-3
The dialer interface is chosen using
dialer caller or dialer called
under the interface itself for incoming calls.
so if I have
dialer 0
dialer caller 5551212
dialer 1
dialer caller 5551213
Dialer 0 is selected when I get a call from 1212
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Williams, Glenn
Sent: Friday, February 15, 2002 9:24 AM
To: 'Brett Lewis'; ccielab@groupstudy.com
Subject: RE: ISDN Dialer pools
For whatever my 2 cents is worth, not really having to think on this that
much, but I wonder if the correct dialer interface is picked up by the
dialer remote-name. That's what I would suspect.
GW
-----Original Message-----
From: Brett Lewis [mailto:blewis@3net-uk.com]
Sent: Friday, February 15, 2002 11:09 AM
To: ccielab@groupstudy.com
Subject: ISDN Dialer pools
Group,
I have an interesting problem using a single BRI interface and two
dialer interfaces. If I configure a router to dial two separate
locations it works fine. If I then dial into that same router from one
of the remote locations I get an Incoming call rejected, unbindable
error. Has anybody got a solution to get around this?
Many Thanks
Brett Lewis
------------------------------------------------------------------------
------------
The information transmitted in this e-mail is intended only for the
person or entity to which it is addressed and may contain confidential
and/or privileged material. Any views, statements or opinions hereby
expressed may not represent those of 3net. If you are not the intended
recipient, please be advised that you have received this e-mail in error
and that any use, dissemination, forwarding, printing or copying of this
e-mail is prohibited. If you received this in error, please contact the
sender immediately and delete the material from any computer.
------------------------------------------------------------------------
------------
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:24 GMT-3