From: Steven Weber (itweber@xxxxxxxxxxxxx)
Date: Fri Feb 15 2002 - 12:32:29 GMT-3
all the routes are reachable, but rebooting didn't help
----- Original Message -----
From: "Williams, Glenn" <WILLIAMSG@PANASONIC.COM>
To: "'Steven Weber'" <itweber@earthlink.net>; "Church, Chuck"
<cchurch@USTA.com>; <ccielab@groupstudy.com>
Sent: Friday, February 15, 2002 10:08 AM
Subject: RE: distribute lists in IS-IS........
> Are the routes now unreachable due to the fact that the route table points
> to the wrong interface? BTW did you try the ios fix all of rebooting?
>
> GW
>
> -----Original Message-----
> From: Steven Weber [mailto:itweber@earthlink.net]
> Sent: Friday, February 15, 2002 9:03 AM
> To: Williams, Glenn; Church, Chuck; ccielab@groupstudy.com
> Subject: Re: distribute lists in IS-IS........
>
>
> I was doing it over ethernet though.....hmmm :-s
> ----- Original Message -----
> From: "Williams, Glenn" <WILLIAMSG@PANASONIC.COM>
> To: "'Steven Weber'" <itweber@earthlink.net>; "Church, Chuck"
> <cchurch@USTA.com>; <ccielab@groupstudy.com>
> Sent: Friday, February 15, 2002 9:59 AM
> Subject: RE: distribute lists in IS-IS........
>
>
> > Depends if it is on. If a FR physical, it will be off.
> > GW
> >
> > -----Original Message-----
> > From: Steven Weber [mailto:itweber@earthlink.net]
> > Sent: Friday, February 15, 2002 8:54 AM
> > To: Williams, Glenn; Church, Chuck; ccielab@groupstudy.com
> > Subject: Re: distribute lists in IS-IS........
> >
> >
> > William,
> >
> > you bring up a good point, why is ISIS seeing it's own routes from EIGRP
> in
> > the first place, split horizon should prevent that from being sent back
in
> > shouldn't it ?
> >
> > Steve
> > ----- Original Message -----
> > From: "Williams, Glenn" <WILLIAMSG@PANASONIC.COM>
> > To: "'Steven Weber'" <itweber@earthlink.net>; "Church, Chuck"
> > <cchurch@USTA.com>; <ccielab@groupstudy.com>
> > Sent: Friday, February 15, 2002 9:13 AM
> > Subject: RE: distribute lists in IS-IS........
> >
> >
> > > Wouldn't either split horizon or dist list out on the part of EIGRP
> work?
> > > If ISIS I imagine you are trying to use dist list in at interface or
> dist
> > > list out in the ISIS routing protocol? Which way in ISIS did not
work?
> > >
> > > GW
> > >
> > > -----Original Message-----
> > > From: Steven Weber [mailto:itweber@earthlink.net]
> > > Sent: Thursday, February 14, 2002 2:41 PM
> > > To: Church, Chuck; ccielab@groupstudy.com
> > > Subject: Re: distribute lists in IS-IS........
> > >
> > >
> > > I was trying to filter routes that were redistributed into EIGRP from
> > coming
> > > back into ISIS
> > > ----- Original Message -----
> > > From: "Church, Chuck" <cchurch@USTA.com>
> > > To: "'Steven Weber'" <itweber@earthlink.net>; <ccielab@groupstudy.com>
> > > Sent: Thursday, February 14, 2002 3:34 PM
> > > Subject: RE: distribute lists in IS-IS........
> > >
> > >
> > > > Steven,
> > > >
> > > > Remember, ISIS is a link state protocol. You can't filter between
> > > > routers of the same area because their link state databases must be
> the
> > > > same. Same as NLSP or OSPF. Was that what you were trying to do?
> > > >
> > > > Chuck
> > > >
> > > > -----Original Message-----
> > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf
Of
> > > > Steven Weber
> > > > Sent: Thursday, February 14, 2002 12:32 PM
> > > > To: ccielab@groupstudy.com
> > > > Subject: distribute lists in IS-IS........
> > > >
> > > >
> > > > I can't seem to get distribute lists working in ISIS. When I type
the
> > > > command
> > > > in the router accepts it but when I check the config it's not in
> there,
> > > nor
> > > > is
> > > > the filtering working. Does ISIS not support distribute lists ?
> > > >
> > > > -Steve
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:24 GMT-3