From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Thu Feb 14 2002 - 21:15:58 GMT-3
Please send a show dlsw circuits.
Cheers,
Jason Sinclair
Manager, Network Support Group
POWERTEL
Ground Level, 55 Clarence Street,
SYDNEY NSW 2000
AUSTRALIA
office: + 61 2 8264 3820
mobile: + 61 416 105 858
* sinclairj@powertel.com.au
-----Original Message-----
From: CHRIS HUGO [mailto:chrishugo@yahoo.com]
Sent: Friday, 15 February 2002 00:31
To: Ahmed Mamoor Amimi
Cc: ccielab@groupstudy.com
Subject: Re: Simulate NetBEUI traffic
I tried the configuration and I still couldn't pass any
traffic. I did make minor config changes to match the book. Let me know if
this should be changed.
I also checked my dlsw peering:
r2# sh dlsw peer
Peers: state pkts_rx pkts_tx type
drops ckts TCP uptime
TCP 135.2.15.81 CONNECT 87 164 conf
0 0 0 00:43:48
TCP 135.2.15.85 CONNECT 86 162 conf
0 0 0 00:43:28
TCP 135.2.15.73 CONNECT 10 10 conf
0 0 0 00:03:50
For now I have this topology:
(tr)r1(eth)--------(eth)Ra(serial)------(serial)Rb(eth)---------(eth)r2(tr)
I have posted the running-configs bellow
r1#sh ru
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r1
!
!
ip subnet-zero
!
!
!
source-bridge ring-group 100
dlsw local-peer peer-id 135.2.15.73
dlsw remote-peer 0 tcp 135.2.15.85
dlsw remote-peer 0 tcp 135.2.15.81
dlsw remote-peer 0 tcp 135.2.15.77
!
!
dspu pu HOST rmac 5555.5555.5555 rsap 4 lsap 4
!
interface Loopback0
ip address 135.2.10.1 255.255.255.0
no ip directed-broadcast
ip ospf interface-retry 0
!
interface Ethernet0
no ip address
no ip directed-broadcast
ip ospf interface-retry 0
!
interface Serial0
ip address 135.2.15.34 255.255.255.224
no ip directed-broadcast
encapsulation ppp
ip ospf interface-retry 0
!
interface Serial1
no ip address
no ip directed-broadcast
shutdown
!
interface TokenRing0
mac-address 6666.6666.6666
ip address 135.2.15.73 255.255.255.224
no ip directed-broadcast
ip ospf interface-retry 0
ring-speed 16
source-bridge 50 1 100
dspu enable-pu lsap 4
dspu start HOST
!
router ospf 100
network 135.2.0.0 0.0.255.255 area 0
!
ip classless
!
!
bridge 1 protocol ieee
!
line con 0
transport input none
line aux 0
line vty 0 4
login
!
end
routera#sh ru
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname routera
!
!
ip subnet-zero
!
!
!
source-bridge ring-group 100
dlsw local-peer peer-id 135.2.15.85
dlsw remote-peer 0 tcp 135.2.15.73
dlsw remote-peer 0 tcp 135.2.15.81
dlsw remote-peer 0 tcp 135.2.15.77
dlsw bridge-group 1
!
!
interface Ethernet0
ip address 135.2.15.85 255.255.255.252
no ip directed-broadcast
ip ospf interface-retry 0
bridge-group 1
!
interface Serial0
ip address 135.2.15.35 255.255.255.224
no ip directed-broadcast
encapsulation ppp
ip ospf interface-retry 0
no ip mroute-cache
no fair-queue
clockrate 64000
!
interface Serial1
ip address 135.2.15.65 255.255.255.252
no ip directed-broadcast
encapsulation ppp
ip ospf interface-retry 0
clockrate 64000
!
interface Serial2
no ip address
no ip directed-broadcast
shutdown
!
interface Serial3
no ip address
no ip directed-broadcast
shutdown
!
interface BRI0
no ip address
no ip directed-broadcast
shutdown
!
router ospf 100
network 135.2.0.0 0.0.255.255 area 0
!
ip classless
!
!
bridge 1 protocol ieee
!
line con 0
transport input none
line aux 0
line vty 0 4
!
end
routerb# sh ru
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname routerb
!
!
ip subnet-zero
!
!
!
source-bridge ring-group 100
dlsw local-peer peer-id 135.2.15.81
dlsw remote-peer 0 tcp 135.2.15.73
dlsw remote-peer 0 tcp 135.2.15.85
dlsw remote-peer 0 tcp 135.2.15.77
dlsw bridge-group 1
!
!
interface Ethernet0
ip address 135.2.15.81 255.255.255.252
no ip directed-broadcast
ip ospf interface-retry 0
bridge-group 1
!
interface Serial0
ip address 135.2.15.69 255.255.255.252
no ip directed-broadcast
encapsulation ppp
ip ospf interface-retry 0
no ip mroute-cache
no fair-queue
!
interface Serial1
ip address 135.2.15.66 255.255.255.252
no ip directed-broadcast
encapsulation ppp
ip ospf interface-retry 0
!
interface BRI0
no ip address
no ip directed-broadcast
shutdown
!
router ospf 100
network 135.2.0.0 0.0.255.255 area 0
!
ip classless
!
!
bridge 1 protocol ieee
!
line con 0
transport input none
line aux 0
line vty 0 4
!
end
r2#sh
01:22:50: %SYS-5-CONFIG_I: Configured from console by
consoleru
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r2
!
!
ip subnet-zero
!
!
!
source-bridge ring-group 100
dlsw local-peer peer-id 135.2.15.77
dlsw remote-peer 0 tcp 135.2.15.81
dlsw remote-peer 0 tcp 135.2.15.85
dlsw remote-peer 0 tcp 135.2.15.73
!
!
dspu host HOST xid-snd 0d0d50d0 rmac 6666.6666.6666 rsap 4
lsap 4
!
interface Ethernet0
no ip address
no ip directed-broadcast
ip ospf interface-retry 0
!
interface Serial0
ip address 135.2.15.70 255.255.255.252
no ip directed-broadcast
encapsulation ppp
ip ospf interface-retry 0
no ip mroute-cache
no fair-queue
clockrate 64000
!
interface Serial1
no ip address
no ip directed-broadcast
shutdown
!
interface TokenRing0
mac-address 5555.5555.5555
ip address 135.2.15.77 255.255.255.252
no ip directed-broadcast
ip ospf interface-retry 0
ring-speed 16
source-bridge 50 1 100
dspu enable-host lsap 4
dspu start HOST
!
router ospf 100
network 135.2.0.0 0.0.255.255 area 0
!
ip classless
!
!
bridge 1 protocol ieee
!
line con 0
transport input none
line aux 0
line vty 0 4
!
end
Ahmed Mamoor Amimi <mamoor@ieee.org> wrote: yeap this is
the same... just make the PU (client) R1 and the HOST (server)
R2 ..... point both of them to there
mac address by using rmac command and also to local and
remote SAP (that
should be the same on both sides).
I have told that this will also do on ethernet.
-Mamoor
----- Original Message -----
From: CHRIS HUGO
To: Ahmed Mamoor Amimi
Cc:
Sent: Thursday, February 14, 2002 10:02 AM
Subject: Re: Simulate NetBEUI traffic
> Hello Ahmed,
> Can your simulation also work with this type of topology?
>
--(tr)r1(eth)--------(eth)Ra(serial)------(serial)Rb(eth)---------(eth)r2(
tr)--
> thank you,
> chris hugo
> Ahmed Mamoor Amimi wrote: sorry the diagram was.....
>
> r1---(tr)-----Ra------Rb-----(tr)-----r2
>
> Ra and Rb are the dlsw routers
>
> -Mamoor
>
> ----- Original Message -----
> From: CHRIS HUGO
> To:
> Sent: Thursday, February 14, 2002 7:56 AM
> Subject: Simulate NetBEUI traffic
>
>
> > Hi folks,
> >
> > I was wondering if their is a way I can simulate NetBEUI
traffic of any
> type of not routable traffic across a DLSW link. I am
going thru Chapter
24
> of the Cisco CCIE Lab Study Guide by Hutnik & Sterlee and
would love to
> actually see traffic traverse these links. I have no way
to attach the
> workstations since this is a online rack that I am using
through the
> internet. This traffic doesn't have to be NetBEUI specific
traffic but I
do
> want to test the scenarios with some type of non-routable
traffic.
> >
> > Thank You in Advance,
> >
> > chris hugo
> >
> >
> >
> > ---------------------------------
> > Do You Yahoo!?
> > Send FREE Valentine eCards with Yahoo! Greetings!
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:23 GMT-3