From: John Neiberger (neiby@xxxxxxxxxx)
Date: Thu Feb 14 2002 - 15:17:54 GMT-3
Here is a relevant link from CCO that describes a few different
situations where this can happen:
http://www.cisco.com/warp/public/104/26.html
Regards,
John
---- On Thu, 14 Feb 2002, Bobby Mann
(Bobby.Mann@roundheaven.com) wrote:
> Maybe you are doing mutual redistribution, and EIGRP routes
are
> preferred over OSPF. Change your admin distance on one of the
> protocols.
>
> bob,
>
>
> -----Original Message-----
> From: Bob Sinclair [mailto:bsin@erols.com]
> Sent: Thursday, February 14, 2002 6:34 AM
> To: ccielab@groupstudy.com
> Subject: OSPF External routes in Database, not table
>
>
> List:
>
> I external routes in the link-state database that are not
showing up in
> my table. Don't know why. They are aging, checksums match.
This
> router is just a plain vanilla area 0 router connected by p-p
frame to
> the ASBR. Have good adjacency. No stubs anywhere. Routes
were
> distributed into OSPF from EIGRP with the subnets command.
Basic
> question, why are external routes in my OSPF database not
showing up in
> my table?
>
> Any thoughts appreciated.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:22 GMT-3