From: Erich Borchert (erichb80@xxxxxxxxxxx)
Date: Thu Feb 14 2002 - 00:32:44 GMT-3
The reason for this is per RFC 1583 every neighbor in the same area must
have a identical LSA database, ditribute-list out would violate this.
-Erich
----- Original Message -----
From: "Emmanuel Oppong" <e-oppong@attbi.com>
To: "Sandro Ciffali" <sandyccie@yahoo.com>; <ccielab@groupstudy.com>
Sent: Wednesday, February 13, 2002 8:03 PM
Subject: RE: CCboot camp lab 17
> ospf does not understand ditribute-list out, but it does understand
> ditribute-list in.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Sandro Ciffali
> Sent: Wednesday, February 13, 2002 6:51 PM
> To: ccielab@groupstudy.com
> Subject: CCboot camp lab 17
>
>
> LAb 17 Task 3, First line says No Ospf route should
> show up in R2, R2 is connected to R1 and is running
> ospf area 20.
> In the solution to achieve this a input distribute
> list is applied to the ospf process with a deny any. I
> am very sure OSPF being a link state protocol does not
> understand distribute list. Is the solution wrong? Or
> I got this wrong?
> Can some one pls. explain?
>
> Thanks in advance
> Sandro
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:22 GMT-3