From: Manny Gonzalez (gonzalu@xxxxxxx)
Date: Wed Feb 13 2002 - 16:23:31 GMT-3
CRTL-^ sequentially until it stops... usually two times will do it...
that is hold down the control key, then press shift and 6 at once. But
remember that CONTROL KEY GOES DOWN FIRST. I have seen too many people
try and hit them all at once only to have it fail! :-))
What i do is hold CONTROL and SHIFT and then hit the 6 key repeatedly
until it stops.
On the same note, remember that if you have a few connections open
sequentially (like telnet to R1 then telnet to R2) you can get to any
particular router or device in the chain by selectively pressing CTRL-^
and then X to get to the router you need. CTRL-^-X will get you all the
way back to the original ROUTER/device. CTRL-^-CTRL-^ will get you to
the second device in the telnet chain and so on.
Regards,
MG
Paul Andersen wrote:
>
> Gang,
>
> Anyone know the key sequence to kill a ping early, so I don't have to wait
> for it to finish?
>
> Thanks,
> Paul Andersen
> pandersen3@hotmail.com
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:21 GMT-3