From: Wade Edwards (wade.edwards@xxxxxxxxxxxxxxxxxxx)
Date: Wed Feb 13 2002 - 14:04:18 GMT-3
You just need to change the 10 line to the 40 line. That way you match
PROVIDER_X_1 and PROVIDER_X_2 to prepend their AS numbers; then match
CUSTOMERS_OR_OURS. All other routes will be denied.
HTH.
-----Original Message-----
From: Przemyslaw Karwasiecki [mailto:karwas@ifxcorp.com]
Sent: Wednesday, February 13, 2002 9:53 AM
To: ccielab@groupstudy.com; cisco-nsp@puck.nether.net
Cc: Daniel Salama
Subject: route-map logic
All,
I am confused with Parkhust Appendix C (route-maps)
Is it possible to build route-map which will do following:
Select only routes matching certain communities, then
(only for those routes)
based on another comunity, do some route modifications?
In other words, how to reject all routes not matching
some community, and continue execution of route map
for only those routes which hasn't been rejected.
Something like:
route-map eBGP_PROVIDER_X-OUT permit 10
description Prefixes from customers
match community CUSTOMERS_OR_OURS
continue with route map
route-map eBGP_PROVIDER_X-OUT permit 20
description Do AS_PREPEND based on community
match communnity PROVIDER_X_1
set as-path prepend 65000
route-map eBGP_PROVIDER_X-OUT permit 30
description Do AS_PREPEND based on community
match communnity PROVIDER_X_2
set as-path prepend 65000 65000
...
Of course there is no "continue with route map" statement in IOS,
at least I don't know any statement like this.
Any suggestions?
Am I totally spoiled with JunOS?
Thanks,
Przemek
Sorry for crossposting, but I belive this problem is in scope
of both lists
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:21 GMT-3