From: jim.phillipo@xxxxxxxxxxxx
Date: Tue Feb 12 2002 - 22:09:59 GMT-3
When I do a debug IP RIP on R1 10.21.1.2 I am not seeing any updates
for the 10.51 and 10.65 networks ?
I was under the impression the distance command with a access list set the
specified networks Admin distance to 120 and the rest to 130 ?
A portion of the config from router 2
router ospf 1
redistribute rip metric 100 subnets
network 10.101.1.2 0.0.0.0 area 0
network 137.20.20.1 0.0.0.0 area 2
default-information originate metric 200 metric-type 1
distance 130
distance 110 0.0.0.0 255.255.255.255 1
!
router rip
version 2
timers basic 5 15 0 30
redistribute ospf 1 metric 2
passive-interface Ethernet0
passive-interface Serial0
network 10.0.0.0
distance 130
distance 120 10.21.1.2 0.0.0.0 2
!
access-list 1 permit 10.33.0.0 0.0.255.255
access-list 1 permit 10.3.0.0 0.0.255.255
access-list 1 permit 10.6.0.0 0.0.255.255
access-list 1 permit 10.100.0.0 0.0.255.255
access-list 2 permit 10.51.0.0 0.0.255.255
access-list 2 permit 10.65.0.0 0.0.255.255
!
!
Jim Phillipo, CCNP, CCDP
Sr. Internetworking Engineer
W: 401.456.1821 F: 401.456.0599 M: 781.983.0316
90 Royal Little Drive, Providence, RI 02904
www.guardent.com
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:20 GMT-3