From: roy bustos (roybustos@xxxxxxxxxxx)
Date: Tue Feb 12 2002 - 19:33:28 GMT-3
no. where did you read that?
Roy
----- Original Message -----
From: "Jason Sinclair" <sinclairj@powertel.com.au>
To: <ccielab@groupstudy.com>
Sent: Tuesday, February 12, 2002 2:41 PM
Subject: Clarification of ESI in ATM
> All,
>
> My understanding is that when you use the ESI in ATM you MUST set the
> selector byte to match the remote sub-if number. Ie if the remote is on
> atm0/0.2 then the selector to map to that ( ie if using 1577) would be
.02?
>
> Let me know if this is right.
>
> Thanks,
>
> Jason Sinclair
> Manager, Network Support Group
> POWERTEL
> Ground Level, 55 Clarence Street,
> SYDNEY NSW 2000
> AUSTRALIA
> office: + 61 2 8264 3820
> mobile: + 61 416 105 858
> * sinclairj@powertel.com.au
>
>
>
>
> **********************************************************************
> PowerTel Limited, winners of
> Broadband Wholesale Carrier of the year, CommsWorld Telecomms Awards 2001
> Best Emerging Telco, Australian Telecom Awards 2001
>
> **********************************************************************
> This email (including all attachments) is intended solely for the named
> addressee. It is confidential and may contain commercially sensitive
> information. If you receive it in error, please let us know by reply
email,
> delete it from your system and destroy any copies.
>
> This email is also subject to copyright. No part of it should be
reproduced,
> adapted or transmitted without the prior written consent of the copyright
owner.
>
> Emails may be interfered with, may contain computer viruses or other
defects
> and may not be successfully replicated on other systems. We give no
> warranties in relation to these matters. If you have any doubts about
> the authenticity of an email purportedly sent by us, please contact us
> immediately.
>
> **********************************************************************
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:20 GMT-3