From: Sam (SamB@xxxxxxxxx)
Date: Mon Feb 11 2002 - 21:45:11 GMT-3
I assume you mean SNA traffic, you can use the following...
On client (R7), do:
dspu host R6T xid-snd 01712358 rmac 4000.3745.6666 rsap 4 lsap 4
dspu host R6DLSW xid-snd 01712360 rmac 4000.3745.6666 rsap 12 lsap 12
dspu host R6VTAM xid-snd 01712359 rmac 4000.3745.6666 rsap 8 lsap 8
interface Ethernet0/0
mac-address 4000.1010.7777
dspu enable-host lsap 4
dspu enable-host lsap 8
dspu enable-host lsap 12
dspu start R6T
dspu start R6DLSW
dspu start R6VTAM
On server (R6), do:
dspu pu R7_HOST rmac 4000.1010.7777 rsap 4 lsap 4
dspu pu R7_MAINFRA rmac 4000.1010.7777 rsap 8 lsap 8
dspu pu R7_BIGIRON rmac 4000.1010.7777 rsap 12 lsap 12
interface GigabitEthernet1/0/0
mac-address 4000.3745.6666
dspu enable-pu lsap 4
dspu enable-pu lsap 8
dspu enable-pu lsap 12
!
You need to configure IP to get the connectivity though. For the
related info, search "dspu start" on ccielab archive.
----- Original Message -----
From: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
To: <ccielab@groupstudy.com>
Sent: Monday, February 11, 2002 4:23 PM
Subject: generate non-routable traffic from router
can anyone tell me how to generate non-routable traffic from a router link
netbios,sna ... to test that we have
configured right....
I was wondering how protor will check such configs that require other
machines..
-Mamoor
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:19 GMT-3