Re: dlsw ?'s

From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Mon Feb 11 2002 - 11:09:57 GMT-3

• Next message: Ahmed Mamoor Amimi: "Re: CCIE San Jose Lab Today...."
• Previous message: sherry huies: "problem between ISL and RIP,IGRP with config(again)"
• Maybe in reply to: Arthur Chan: "dlsw ?'s"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
hint : use commands

linger
backup

-Mamoor
----- Original Message -----
From: Arthur Chan <chanmanlan2002@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Monday, February 11, 2002 11:03 AM
Subject: dlsw ?'s

> Diagram 1:
>
> ------R2 1.0.0.1
> eth | | tok0
> --R1---- ring 1
> 2.0.0.1 | | tok0
> ------R3 1.0.0.2
>
>
> Diagram 2:
> -----R2 1.0.0.1
> | |
> tok0 | vlan1
> -----R1------| |
> 2.0.0.1 | |
> ------R3 1.0.0.2
>
> In both diagrams 1 & 2 R1, R2, R3 are running
> DLSW, how do you perform the following:
>
> 1. How to configure DLSW for R1 to
> allow routes to ring1 in diagram 1 and
> vlan1 in diagram 2 to prefer R2 over R3?
>
> 2. For new dlsw routes, R3 is preferred over
> R2. R1 should still prefer R2 over R3 and
> should not be effected.
>
> 3. R3 should wait for 10mins before dropping
> connections when R2 comes up.
>
> Besides:
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ibm_
c/bcprt2/bcddlsw.htm
>
> What are some good URLs which discuss about these
> DLSW concepts?
>
> -Art
>
>
>

• Next message: Ahmed Mamoor Amimi: "Re: CCIE San Jose Lab Today...."
• Previous message: sherry huies: "problem between ISL and RIP,IGRP with config(again)"
• Maybe in reply to: Arthur Chan: "dlsw ?'s"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:18 GMT-3