From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Sun Feb 10 2002 - 20:59:51 GMT-3
Thanks for the tip.....
I got it why it was not working on the main interface..... and i was
guessing it right it was SPOOFING.
If u can see that in dialer interface it always UPUP and SPOOF and in acutal
async interface it has to be reset to
initailize the modem for sometime and for that time the interface gets down
and stupid ospf thinks to reconnect the
demand circuit as there is topology change.
ANYONE STUDYING FOR DEMAND CIRCUIT SHOULD DO IT WITH DIALER PROFILE IT WILL
NOT BE A PAIN LIKE I HAVE BEAR IT ......
-Mamoor
----- Original Message -----
From: KK FoK <rgb98a@hotmail.com>
To: <mamoor@ieee.org>; <ccielab@groupstudy.com>
Sent: Sunday, February 10, 2002 9:17 AM
Subject: Re: Isdn Demand circuit
> I experienced the same problem a while ago. When I switched to dialer
> profile everything worked just fine.
>
> I guess this is some sort of limitation of dialup using aux port.
>
>
> >From: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
> >Reply-To: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
> >To: <ccielab@groupstudy.com>
> >Subject: Isdn Demand circuit
> >Date: Sun, 10 Feb 2002 05:31:42 +0500
> >
> >I am fadup with ospf demand circuit....
> >I have the following damn simple scenrio....... please help !
> >
> > ________
> > | |----------------------r2
> >r7-------|framrelay|
> > | | |
> > | |_______|---------------------r4
> > | |
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:18 GMT-3