From: yuen me (yuen_me@xxxxxxxxxxx)
Date: Sun Feb 10 2002 - 18:22:26 GMT-3
try putting "network a.b.c.d" into router eigrp / igrp
yuenme
>From: Nirav Kumar <nirav_sing@yahoo.com>
>Reply-To: Nirav Kumar <nirav_sing@yahoo.com>
>To: ccielab@groupstudy.com
>Subject: DEFAULT ROUTING WITH EIGRP USING THE ip- default network command
>Date: Sat, 9 Feb 2002 22:32:20 -0800 (PST)
>
>A few days back I passed CCIE written with 90 %. It
>feels great !
>
>Now need some help on the lab portion from the Cisco
>gurus !!
>
>
>I am refrerring to Solie book for lab.
>
>On page : 708, Heading : Default routing with EIGRP,
>
> Redistribute a default static route into EIGRP so
>that EIGRP recognizes the route of 0.0.0.0 to be the
>default route. A default static route is created with
>the global router entry ip route 0.0.0.0.0.0.0.0
>next_hop_IP_address. This route then must be
>redistributed into EIGRP with the redistribute static
>command.
>
>Am able to sucessfully configure this.
>
>BUT
>
> If the network 0.0.0.0 is not used, you can still
>mark the route as a default route by using the ip
>default network a.b.c.d command. but using the
>deafault network command, it does not work.
>
>
>Any ideas, how to make this work?, what specifically
>do you need to do to get this to work ?
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:18 GMT-3