From: Brian Dennis (brian@xxxxxx)
Date: Sun Feb 10 2002 - 01:13:52 GMT-3
Ludwig,
Get the WS-X5013 module. It has twenty four 10 meg RJ-45 ports. This module
of course won't support trunking but just trunk to the two port on the
supervisor. You shouldn' t need more than two routers trunking for a lab.
Brian Dennis, CCIE #2210 (R&S)(ISP/Dial)
On Saturday 09 February 2002 03:38 pm, Ludwig Morales wrote:
> Hi Brian!
>
> I'm not very familiar with the cat5000 architecture, i find out that the
> blade with 10BaseT port is the WS-5012A right?
> i saw a few pictures of this module on ebay, and i dont see RJ45 plugs!!!
> am i wrong?
>
> http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=2001994030
>
> this is the right module,, right?
>
> regards
>
> Ludwig
>
> ----- Original Message -----
>
> From: "Brian Dennis" <brian@5g.net>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, February 09, 2002 3:06 AM
> Subject: Re: CAT5000
>
> > If you don't need more than 2 routers that trunk don't buy a Fast
> > Ethernet blade. Just trunk to the SUP card. Buy a regular 10 meg blade.
> >
> > You should be able to get a Cat5000 like that on eBay for about $650 to
>
> $750.
>
> > Brian Dennis, CCIE #2210 (R&S)(ISP/Dial)
> >
> > On Friday 08 February 2002 10:40 pm, you wrote:
> > > Get 10/100 Fast Ethernet Switching Module WSX5213A. It has 12 10/100
>
> Fast
>
> > > Ethernet ports. That is what I use.
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > > Ludwig Morales
> > > Sent: Friday, February 08, 2002 10:19 PM
> > > To: ccielab@groupstudy.com
> > > Subject: CAT5000
> > >
> > >
> > > Guysss,=20
> > > I'm about to buy CAT5000 wich modules should i include aside from the =
> > > sup, o and wich sup
> > >
> > > Thanks=20
> > >
> > > ludwig
> > >
> > > [GroupStudy.com removed an attachment of type text/x-vcard which had a
>
> name
>
> > > of Ludwig A. Morales.vcf]
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:17 GMT-3