From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Sat Feb 09 2002 - 08:50:05 GMT-3
yes it dont show in newer version but is enabled....
u can check it by giving "sh clns nei"
this command works if clns routing in enabled.
-Mamoor
----- Original Message -----
From: John Neiberger <neiby@ureach.com>
To: <ccielab@groupstudy.com>
Cc: Carl Timm <carl_timm@hotmail.com>
Sent: Friday, February 08, 2002 8:09 AM
Subject: Re: CLNS routing enabled by default?? never see it
> We tested this a few weeks ago and discovered that it will show
> up automatically in older IOS versions but not in the newer
> ones.
>
> John
>
> ---- On Thu, 7 Feb 2002, michael robertson
> (michael_w_2ca@yahoo.ca) wrote:
>
> > Hi, group,
> >
> > I have checked in my lab. after I input router isis,
> > CLNS should be enabled by default and you should be
> > able to see "clns routing" in the "sh run" according
> > to Jeff's book, but I remember that I have never seen
> > this "clns routing" in show run, can somebody kindly
> > explain this to me? my ios is
> > c3620-jo3s56i-mz_121-2_T.bin
> >
> > Thanks
> >
> >
> > michael
> >
> >
> >
> >
> >
> > --- Carl Timm <carl_timm@hotmail.com> wrote:
> > > CLNS is automatically enabled when you enable IS-IS.
> > > If you are running
> > > IS-IS over any frame or ATM connections that you are
> > > using map statements
> > > for you will also need to map CLNS.
> > >
> > >
> > > >From: "DAN DORTON" <DHSTS68@dhs.state.il.us>
> > > >Reply-To: "DAN DORTON" <DHSTS68@dhs.state.il.us>
> > > >To: <ccielab@groupstudy.com>
> > > >Subject: To CLNS, or not to CLNS...
> > > >Date: Fri, 18 Jan 2002 13:47:33 -0600
> > > >
> > > >Is the only time that you need to enable clns
> > > routing for isis when you
> > > >wish to do isis over multi-point frame interfaces
> > > with no inverse-arp?
> > > >**Note: CCIE Security list is available. For more
> > > information go to:
> > > >http://www.groupstudy.com/list/security.html
> > >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:17 GMT-3