From: Przemyslaw Karwasiecki (karwas@xxxxxxxxxxx)
Date: Fri Feb 08 2002 - 16:48:10 GMT-3
Hello Group,
According to cisco documentation if one has enabled
policy routing on specific interface, route-map referenced
in "ip policy route-map <name>" is "executed" before routing
table is consulted.
If this is a case, is it possible to use "match ip next-hop"
criteria in such route-maps?
Origin of my question can be traced to CCBootCamp lab 1.
One of the objective is to provide spoke to spoke connectivity
without L2 maps but use policy routing instead.
Origianal solution use huge access list, enumerating all routes
behind spoke routers. This is IMHO not very elegant and scalable.
I would rather prefer to use something like this:
route-map SPOKES_VIA_HUB permit 10
match ip next-hop 100
set ip next-hop 10.10.1.1
access-list 100 permit ip any 10.10.0.0 0.0.255.255
But how router will know next-hop without consulting
routing table first?
Any ideas?
Przemek
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:16 GMT-3