From: Przemyslaw Karwasiecki (karwas@xxxxxxxxxxx)
Date: Thu Feb 07 2002 - 20:16:51 GMT-3
All,
It looks like I am beating dead horse, but I failed my first
attempt because of FR L3->L2 maping, so I really need to understand it.
At Caslow book, page 135, there is a following paragraph:
"If you have a number of Frame-Relay map statements on a physical
interface or on a multipoint subinterface and you type a Frame-Relay
interace-DLCI statement referencing the same DLCI that the map
statements were referencing, all of the map statements will be erased."
Now, please take a look:
r1#sh run int s 0.1
Building configuration...
Current configuration : 291 bytes
!
interface Serial0.1 multipoint
ip address 10.10.1.1 255.255.0.0
no ip split-horizon
frame-relay map ip 10.10.1.2 102
frame-relay map ip 10.10.1.3 103
frame-relay map ip 10.10.1.5 105
frame-relay interface-dlci 102
frame-relay interface-dlci 103
frame-relay interface-dlci 105
end
r1#
What should I think about it?
Thanks for your comments,
Przemek
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:15 GMT-3