From: Church, Chuck (cchurch@xxxxxxxx)
Date: Thu Feb 07 2002 - 10:33:32 GMT-3
This happens every once in a while. Here's a few things to try:
Use the AUX port on the term server router.
Upgrade your Hyperterm if that's what you're using:
http://www.hilgraeve.com/htpe/index.html
On your com port, turn off the FIFO buffers, if using Windows.
If you're using XP, try something else. I've got 1 router that XP just
won't talk to. %#@*ing Microsoft :)
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
martin abelli
Sent: Thursday, February 07, 2002 7:20 AM
To: ccielab@groupstudy.com
Subject: Console problem
I need help so bad. I have 2509 connected to my pc
through the console port
and to other 7 routers through an octal cable. Never
had any problem till
yesterday when I cannot access the router through the
connsole port.
Consequently, I do not have access to the other 7
routers. Have any member
had this problem before. I have checked and cross
checked literally every
things and it looks ok. I have tried connecting same
cable to another router
and it works fine--it accepts command from the key
board, however, when I
connect to to this problem router it doesn't not
accept commands from key
board. I have tried reload, I can see the output but
router does not accept
command from the key board. My last effort was to
issue a break key and then
to > prompt, that works because the router did accept
commands typed. When I
reload and issue and command or enen hit my ENTER key,
no response from the
router. Is this router in comma or dead forever, Any
help will be highly
appreciated.
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:14 GMT-3