From: Sandro Ciffali (sandyccie@xxxxxxxxx)
Date: Wed Feb 06 2002 - 16:59:46 GMT-3
you are right physical interface does salve the
problem, my debug with subinterface gives message
vencap failed.
how do i make it work with subinterface?
using dynamic will not salve the issue, since dynamic
means peer relation only when needed,
I will try promiscous today in my lab. to see if it
works with combination of sub with a physical. however
anyone done sub to sub dlsw direct encap before?
thanks
sandro
--- Binh Co ONG <ongbinhco@hotmail.com> wrote:
> I had a Peer-Problem with dlsw over Frame when i
> used point-to-multipoint
> subinterface. dlsw debug said "encap failed" even i
> had a "frame-relay map
> dlsw". It worked then on the main interface.
>
> Maybe this can help you
>
> Binh Co
>
> >From: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
> >Reply-To: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
> >To: "Bauer, Rick" <BAUERR@toysrus.com>,
> <ccielab@groupstudy.com>
> >Subject: Re: dlsw on frame
> >Date: Wed, 6 Feb 2002 09:20:04 +0500
> >
> >in my opinion if using llc then do a dynamic on
> ends, if doing dlsw then
> >nail down or use promestic (sorry for spelling)
> >
> >-Mamoor
> >
> >
> >----- Original Message -----
> >From: Bauer, Rick <BAUERR@toysrus.com>
> >To: <ccielab@groupstudy.com>
> >Sent: Wednesday, February 06, 2002 1:05 AM
> >Subject: RE: dlsw on frame
> >
> >
> > > If memory serves me, in order to use direct
> encapsulation with pass-thru
> >you
> > > have to have token ring interfaces on both sides
> of the frame relay
> >link.
> > >
> > > -----Original Message-----
> > > From: Sandro Ciffali
> [mailto:sandyccie@yahoo.com]
> > > Sent: Tuesday, February 05, 2002 2:49 PM
> > > To: ccielab@groupstudy.com
> > > Subject: dlsw on frame
> > >
> > >
> > > group,
> > > I have two conflicting doc. from cisco,
> > > One says to configure DLSW direct encapsulation
> using
> > > frame-relay with the end to end ack., i need to
> map
> > > "frame-relay map dlsw", The other doc. says map
> llc2,
> > > I remember correctly doing frame-relay map llc2
> for
> > > local ack. and I know for sure that we use
> frame-relay
> > > map dlsw for the end to end ack. Can someone
> confirm
> > > that for me?
> > >
> > > Also i am trying to simulate direct encap for
> DLSW
> > > with end to end ack. I used frame map dlsw for
> the
> > > same and my peer does not come up. Has some one
> done
> > > this before, Can some one pls. point me in the
> right
> > > direction pls.
> > >
> > > thanks
> > > Sandro
> > >
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:14 GMT-3