From: Donahue, Gary (GDonahue@xxxxxxxxxxxxxxx)
Date: Wed Feb 06 2002 - 12:16:00 GMT-3
CEF doesn't work too well on a 2500 series router. :)
GAD
-----Original Message-----
From: MADMAN [mailto:dmadlan@qwest.com]
Sent: Wednesday, February 06, 2002 9:49 AM
To: Donahue, Gary
Cc: ccielab@groupstudy.com
Subject: Re: Multilink interface vs. Virtual Templates
Or more simply enable CEF and load share per packet or per
destination, your choice.
Dave
"Donahue, Gary" wrote:
>
> Bond two T1s. I can create a virtual template, or on newer code I can
create
> a multilink interface.
>
> GAD
>
> -----Original Message-----
> From: MADMAN [mailto:dmadlan@qwest.com]
> Sent: Tuesday, February 05, 2002 10:18 AM
> To: Donahue, Gary
> Cc: ccielab@groupstudy.com
> Subject: Re: Multilink interface vs. Virtual Templates
>
> What are you trying to do?? you can multilink on a virtual template,
> the two are not the same.
>
> Dave
>
> "Donahue, Gary" wrote:
> >
> > What's the difference, and what's the benefit of one over the other?
> >
> > I've used and seen both, and assumed the Multilink method was newer and
> > prefered, but I can't find any info on this.
> >
> > Thanks,
> >
> > GAD
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:13 GMT-3