From: M. Nabelsi (orange15@xxxxxxxxxxx)
Date: Wed Feb 06 2002 - 03:07:09 GMT-3
Hi all,
Any idea or reason why it takes too long to get the isdn channel up.
2#ping
Protocol [ip]:
Target IP address: 30.1.1.1
Repeat count [5]: 50
Datagram size [100]: 200
Timeout in seconds [2]:
Extended commands [n]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 50, 200-byte ICMP Echos to 30.1.1.1, timeout is 2 seconds:
...............
01:56:32: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up
01:56:32: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 18008358663
01:56:32: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to
up.!!!!!!!!!!!
01:56:33: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:2, changed
state to up
01:56:33: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2,
changed state to up!!!!!!!!!!!!!!!!!!!!!!!
Success rate is 68 percent (34/50), round-trip min/avg/max = 60/62/64 ms
r2#
01:56:38: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 18008358661
frame
Thank you in advance
M.N
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:12 GMT-3