From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Wed Feb 06 2002 - 01:20:04 GMT-3
in my opinion if using llc then do a dynamic on ends, if doing dlsw then
nail down or use promestic (sorry for spelling)
-Mamoor
----- Original Message -----
From: Bauer, Rick <BAUERR@toysrus.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, February 06, 2002 1:05 AM
Subject: RE: dlsw on frame
> If memory serves me, in order to use direct encapsulation with pass-thru
you
> have to have token ring interfaces on both sides of the frame relay link.
>
> -----Original Message-----
> From: Sandro Ciffali [mailto:sandyccie@yahoo.com]
> Sent: Tuesday, February 05, 2002 2:49 PM
> To: ccielab@groupstudy.com
> Subject: dlsw on frame
>
>
> group,
> I have two conflicting doc. from cisco,
> One says to configure DLSW direct encapsulation using
> frame-relay with the end to end ack., i need to map
> "frame-relay map dlsw", The other doc. says map llc2,
> I remember correctly doing frame-relay map llc2 for
> local ack. and I know for sure that we use frame-relay
> map dlsw for the end to end ack. Can someone confirm
> that for me?
>
> Also i am trying to simulate direct encap for DLSW
> with end to end ack. I used frame map dlsw for the
> same and my peer does not come up. Has some one done
> this before, Can some one pls. point me in the right
> direction pls.
>
> thanks
> Sandro
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:12 GMT-3