From: Andrew Bratchell (a.bratchell@xxxxxxxxx)
Date: Sun Feb 03 2002 - 18:10:24 GMT-3
Hi All,
I have a couple of routers running multiple NLSP areas. I have configured
route-aggregation between them which works fine. One of the routers is also
performing mutual redistribution between IPX EIGRP. The question I have is
that I would like to get the summarized NLSP routes into EIGRP. The IOS doc
says that you can only redistribute explicit routes from NLSP into EIGRP.
I can work around this problem by configuring explicit static routes on the
border router and redistributing these static routes back into EIGRP - but
it kind of defeats what I'm trying to do in the first place.
I have tried redistributing defaults routes etc but that doesn't work. Only
explicit static routes get redistributed back.
Any comments would be appreciated.
Thanks
Andy
**********************************************************************
Disclaimer
This email is confidential and intended solely for the use of
the individual to whom it is addressed. Any views or opinions
presented are solely those of the author and do not necessarily
represent those of CAE Office Systems. If you are not the
intended recipient, be adviced that you have recieved this
email in error, and that any use, dissemination, forewarding,
printing or copying of this email is strictly prohibited. If you
recieved this email in error, please contact Lee Gatland on
+44 (0) 1923 477600
**********************************************************************
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:10 GMT-3