2500 Series 16 MB DRAM Upgrade

From: tsgi@xxxxxxxxxxx
Date: Sat Feb 02 2002 - 13:49:48 GMT-3

• Next message: tsgi@xxxxxxxxxxx: "2500 Series DRAM Upgrade"
• Previous message: John Neiberger: "Re: RE: BGP Sync"
• Next in thread: Brad Ellis: "Re: 2500 Series 16 MB DRAM Upgrade"
• Maybe reply: Brad Ellis: "Re: 2500 Series 16 MB DRAM Upgrade"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi CiscoCCIELabs,

I would like to upgrade a Cisco 2500 series router from a 8 MB SIMM
to a 16 MB SIMM. Can I use the standard PC 16 MB SIMM as a
replacement in router?

The Cisco 2500 has one SIMM slot for DRAM. DRAM is available in
either 4, 8, or 16 MB SIMMs. Currently-shipping Cisco 2500s have no
DRAM on the motherboard. Because the Cisco 2500 has only one
SIMM slot for DRAM, DRAM is not additive. Therefore, if you want to
upgrade DRAM from 4 MB to 16 MB, you must remove the 4 MB
SIMM and replace it with the 16 MB SIMM (part number: MEM-
1X16D=)

Thanks for your advise.

Darly

• Next message: tsgi@xxxxxxxxxxx: "2500 Series DRAM Upgrade"
• Previous message: John Neiberger: "Re: RE: BGP Sync"
• Next in thread: Brad Ellis: "Re: 2500 Series 16 MB DRAM Upgrade"
• Maybe reply: Brad Ellis: "Re: 2500 Series 16 MB DRAM Upgrade"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:10 GMT-3