From: Tim O'Brien (tobrien@xxxxxxxxxxxx)
Date: Mon Jan 14 2002 - 10:25:55 GMT-3
Actually, Wojtek, Brant is absolutely correct. Looks like you are the one
that has no idea what you are talking about...
It can be done on a Catalyst 6xxx
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_7_1/conf_gd/e
_trunk.htm#1022122
Watch the word wrap, it is a ling link...
And on the Catalyst 55xx (available from ver 5.4)
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_6_3/config/e
_trunk.htm#1021601
again, watch the word wrap, it is a long link.
Tim
----- Original Message -----
From: "Wojtek Iwanczyk" <wiwanczyk@tec-adv.com>
To: <ccielab@groupstudy.com>
Sent: Friday, January 11, 2002 11:21 AM
Subject: RE: "Clear Trunk"
> do not trust Brant Stevens, he has no idea what he is talking about.
> -----Original Message-----
> From: Brant Stevens [mailto:branto@myrealbox.com]
> Sent: Friday, January 11, 2002 10:51 AM
> To: Frei Peter; Giveortake@aol.com; ccielab@groupstudy.com
> Subject: Re: "Clear Trunk"
>
>
> FYI, In later versions of Catalyst code, there is a provision for clearing
> VLAN 1 from a trunk.
> ----- Original Message -----
> From: "Frei Peter" <Peter.Frei@delec.ch>
> To: <Giveortake@aol.com>; <ccielab@groupstudy.com>
> Sent: Friday, January 11, 2002 8:48 AM
> Subject: AW: "Clear Trunk"
>
>
> > Hi David
> > It's not possible to clear Vlan 1 from a trunk. Because of that some
> system
> > engineer do not even use vlan 1 as management vlan.
> >
> > Peter
> >
> > -----Urspr|ngliche Nachricht-----
> > Von: Giveortake@aol.com [mailto:Giveortake@aol.com]
> > Gesendet: Freitag, 11. Januar 2002 05:03
> > An: ccielab@groupstudy.com
> > Betreff: "Clear Trunk"
> >
> >
> > On a Cat 5000 is it possible or even ever desirable to not allow VLAN 1
to
> > trunk? I can clear all other VLAN's, but always tells me I can't clear
> > VLAN
> > 1....
> >
> > Thanks,
> >
> > David
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:27 GMT-3