From: Neil G. Legada (nglegada@xxxxxxxxxxx)
Date: Mon Jan 14 2002 - 06:06:52 GMT-3
from what i saw from the previous post ..... c: is the second parameter on
the source-bridge .... d: is the bridge-group parameter ....
pls anyone confirm ??? ....
rgds,
ngl
----- Original Message -----
From: "Alan" <groupstudy@x263.net>
To: <ccielab@groupstudy.com>
Sent: Sunday, January 13, 2002 9:20 PM
Subject: Am I right? about translation bridge.
> source-bridege transparent a b c d
> what do those parameters mean in the above command?
> Refer the following example from doc cd.
> a. Virtual ring group created by the source-bridge ring-group command. so
9 here.
> b. any unique number, here is 6, it could be 66, 666, or 6758,
> c. bridge number of ethernet interface, we use "bridge-group 2", so we
have 2 here.
> d. number ethernet interface connect to bridge b. we have e0 and e1, so we
have 2 at this place.
> Am I right?
>
> source-bridge ring-group 9
> source-bridge transparent 9 6 2 2
> !
> interface tokenring 0
> source-bridge 5 2 9
> !
> interface token ring 1
> source bridge 4 2 9
> !
> interface ethernet 0
> bridge-group 2
> !
> interface ethernet 1
> bridge-group 2
>
> bridge 2 protocol ieee
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:27 GMT-3