From: Huy Luu (Huy_Luu%COMMONWEALTH@xxxxxxxxxx)
Date: Sun Jan 13 2002 - 01:30:59 GMT-3
ABsolutely, but the problem is I cannot reverse telnet to this port, nor
can I dial in the the modem for remote access. The port seems to be
haing on a connection and I cannot clear it with the clear line command.
Please help.
-----"Bob Usa" <boby2kusa@hotmail.com> wrote: -----
To: Huy_Luu%COMMONWEALTH@ccginc.com, D.Stewart@mail.UTexas.edu
From: "Bob Usa" <boby2kusa@hotmail.com>
Date: 01/12/2002 11:37AM
cc: ccielab@groupstudy.com
Subject: Re:
you can actually use the
aux port for reverse telnet-ing also.>From: "Huy Luu"
<Huy_Luu%COMMONWEALTH@ccginc.com>>Reply-To: "Huy Luu"
<Huy_Luu%COMMONWEALTH@ccginc.com>>To: David L Stewart
<D.Stewart@mail.UTexas.edu>>CC: ccielab@groupstudy.com>Subject:
Re:>Date: Sat, 12 Jan 2002 11:13:56 -0500>>The aux port is use for
dialin for management access, it is not connected>to any router. The port
just seems to hang with an open connection.>>-----David L Stewart
<D.Stewart@mail.UTexas.edu> wrote: ----->>To: "Huy Luu"
<Huy_Luu%COMMONWEALTH@ccginc.com>, ccielab@groupstudy.com>From: David
L Stewart <D.Stewart@mail.UTexas.edu>>Date: 01/11/2002
07:03PM>Subject: Re:>>One end needs the "no exec" command to>keep
the two routersfrom chatting.At 04:59 PM 1/11/2002, Huy Luu
wrote:>Hi>all,>>I have a aux port on a 7200 set up for dial in in
case of an>emergency. I>tried to reverse telnet several times with port
2001 and it>worked. But at>the third try I got an error stating that
the remote host>refuse the>connection. I tried clearing the line and
the aux port but when>I issue>the command "show line " , the aux line
shows a * next to the line,>which I>believe that indicates that the line
is in use. I've tried to>clear the>line and clear aux 0 command but
this * symbol is still in the>"show line">dispaly. How can I make the
aux port drop the>from the CCIELAB list, send a message
to>majordomo@groupstudy.com with the>body containing:>unsubscribe
from the CCIELAB list, send a message to>majordomo@groupstudy.com with the
body containing:>unsubscribe
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:26 GMT-3