From: Paul Young (tsungdapaulyoung@xxxxxxxxx)
Date: Sat Jan 12 2002 - 21:48:07 GMT-3
Hi Raphael:
Actually you can ping all IP addresses in VLAN A if
you add the statement below on R6:
router ospf <process id>
area 0 range 140.4.4.0 255.255.255.0
The way Lab 19 is structured is that they might not
want you to add the statement above just yet until you
work on Task Ten the BGP section and found out that
some networks are being advertised via BGP that should
be via IGRP and really cause some routing problems (as
mentioned in the Hints for lab 19).
My suggestion is that you structure you approach and
save your work step by step towards the end of the lab
so that you can back track if need to or if you get
stuck.
Good luck,
Paul Young.
--- Raphael Gallegos <raphaeljg@hotmail.com> wrote:
> Does anyone know why you cannot ping interfaces in
> vlanA...Area 0?
> This ping is from router 8 (The IGRP router),
>
> In other words, why is this an exception?
>
> Raphael
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:26 GMT-3