From: Cisco (Cisco@xxxxxxxxxx)
Date: Sat Jan 12 2002 - 19:23:52 GMT-3
I have never used token ring so I apologize if this question is rather
simple.
I have a 2502, 2513 and an IBM MAU model 8228. I did not buy the black heavy
cables with the MAU but I was able to find them on ebay today, of course I
had to purchase another MAU to get the cables. I understand these cables
have a RJ-45 connector on one end, is that correct?
Now the routers being DB9 connectors, I have two little gizmo's that are DB9
to RJ45. I assume I can use a connector to connect the RJ45 from the MAU to
the RJ45 from the routers?
I searched the archives and I did find something that sounded like this
would not be a problem but I wanted to make sure I was reading it correctly
and if I needed different cables I was hoping to find out what those would
be so I could find some.
TIA
go
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:26 GMT-3