From: Lopez, James (james.lopez@xxxxxxxxxxxxxx)
Date: Sat Jan 12 2002 - 18:00:53 GMT-3
Show IP protocol.
2511#sh ip protocol
Routing Protocol is "igrp 1"
Sending updates every 90 seconds, next due in 77 seconds
Invalid after 270 seconds, hold down 280, flushed after 630
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
IGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
IGRP maximum hopcount 100
IGRP maximum metric variance 1
Redistributing: igrp 1
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
Distance: (default is 100)
2511#
-----Original Message-----
From: Michael Kilpatrick [mailto:mjkilpat@yahoo.com]
Sent: Saturday, January 12, 2002 2:44 PM
To: ccielab@groupstudy.com
Subject: IGRP Timers
Are there any show commands besides "sh run" that displays what timers are
configured for IGRP? Like is there anyway to see what the default timers
are
through a show command? Thx.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:26 GMT-3