From: Waters, Kivas (UK72) (Kivas.Waters@xxxxxxxxxxxxx)
Date: Sat Jan 12 2002 - 16:12:57 GMT-3
Ohhh I see where you're coming from now. the only thing I can think of is
something like ...
dlsw remote-peer 0 tcp 1.1.1.1 dmac-output-list 700
There seems to be a bit of confusion here because ACL 7xx's are supposed, by
definition of the ACL, to match on source addess only. I believe that in
this case, that is not true and that "dmac-output-list" redefines the ACL700
to mean destination address.
Someone have any other idea's?
regards
Ki
-----Original Message-----
From: Markus Haas [mailto:mh@nmc-m.dtag.de]
Sent: 12 January 2002 18:50
To: Waters, Kivas (UK72)
Cc: Ccielab
Subject: AW: DLSW mac-address filter
Hi Kivas,
I think that your sample is for looking for an specific MAC adress.
Now, I don't want to send explorer frames to a spezific mac-address.
Any idea's about this issue ?
Thanks for your tip about the peer-id.
Markus
-----Ursprungliche Nachricht-----
Von: nobody@groupstudy.com [mailto:nobody@groupstudy.com]Im Auftrag von
Waters, Kivas (UK72)
Gesendet: Samstag, 12. Januar 2002 19:35
An: Markus Haas; Ccielab
Betreff: RE: DLSW mac-address filter
R2 : dlsw icanreach mac-address 1111.222.3333 mask ffff.ffff.ffff
or
R1 : dlsw mac-addr 1111.2222.3333 remote-peer ip-address 2.2.2.2
Check up on the above, I have been known to be wrong, some.. well Ok lots of
times.
regards
Ki
PS Your R2 local peer-id is not quite right.
-----Original Message-----
From: Markus Haas [mailto:mh@nmc-m.dtag.de]
Sent: 12 January 2002 17:40
To: Ccielab
Subject: DLSW mac-address filter
Hi,
I have two routers who have a DLSW connection established. Now I don't want
to
forward explorer Frames
to router R2 to look for MAC Adress 1111.2222.3333 which is on the Ethernet
LAN.
Scenario:
|--TokenRingLAN--<R1>------<R2>--EthernetLAN--|
Konfig:
R1:
source-bridge ring-group 10
dlsw local-peer peer-id 1.1.1.1
dlsw remote-peer 0 tcp 2.2.2.2
interface Virtual-TokenRing0
ip address 10.1.13.1 255.255.255.0
ring-speed 16
source-bridge 1 1 10
source-bridge spanning
R2:
dlsw local-peer peer-id 1.1.1.1 promiscuous
dlsw bridge-group 1
interface Ethernet0
ip address 11.1.23.2 255.255.255.0
no ip proxy-arp
bridge-group 1
bridge 1 protocol ieee
Markus
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:26 GMT-3