From: Yves@xxxxxxxxx
Date: Fri Jan 11 2002 - 10:52:27 GMT-3
Hi Adam,
Not shure for the 2500, you could try with c2500-p-l.12.1-5.T10. I don't
know if you will have the Tag-switching command, but you should have
MP-BGP and VRFs so that you can test the VPN Route distribution.
For the 2600 I'm using 12.2(4)T, the newest version. The image I use is
c2600-telco-mz.122-4.T.bin, it has 7,4 MB so that it fits into a small
Flash. I think the 12.1(?)T also should work.
HTH, Yves
P.S. If c2500-p-l.12.1-5.T10 works (with tag-switching ip), could you let
me know, thanks.
"Adam Craven" <ciscolab29@hotmail.com>
Sent by: nobody@groupstudy.com
11.01.2002 14:03
Please respond to "Adam Craven"
To: ccielab@groupstudy.com
cc:
Subject: MPLS.
I have been attempting to run MPLS a 2500 and 2600 (for testing only). Is
this possible? Will MPLS run only on 3600s and 4000s?
The IOS I attempted to use on 2500/2600 was 12.0(7).T IP plus. I was able
to
configure ip cef but not tag-switching on the serial.
Any advise appreciated.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:25 GMT-3