From: Ola Aiyegbusi (ola@xxxxxxxxxxx)
Date: Fri Jan 11 2002 - 10:34:48 GMT-3
you are a genius!!! I will be using that from now on. Thanks
----- Original Message -----
From: "Jim Brown" <Jim.Brown@CaseLogic.com>
To: "'Lopez, James'" <james.lopez@atosorigin.com>; "'EA Louie'"
<elouie@yahoo.com>; <ccielab@groupstudy.com>
Sent: Thursday, January 10, 2002 6:16 PM
Subject: RE: at the lab exam
> I like to take the 11"x17" sheet of paper, turn it long ways with the 17"
> side running top to bottom. I then fold the top down to the middle of the
> page and fold the bottom up to the middle of the page.
>
> If you flip the paper over you know have an 8.5"x11" work surface with two
> flaps folded under. I then use these flaps for router interface address
> matrices. This way I can fold under the top flap under the network diagram
> and only expose the bottom flap or vice versa.
>
> This saves space and helps me organize my network diagram and tables. You
> can fold the flap down over the network map drawing in the opposite
> direction and use this side for notes or access lists about the router
> matrix on the other side. A quick flip and you can look at important
> information or notes about the router.
>
> The flap method allow me to only expose one flap or the other when I'm
> trying to read the lab book or other diagrams.
>
> It helps me break up that huge sheet of paper into manageable areas. You
> could call it my version of router origami.
>
> -----Original Message-----
> From: Lopez, James [mailto:james.lopez@atosorigin.com]
> Sent: Thursday, January 10, 2002 3:56 PM
> To: 'EA Louie'; ccielab@groupstudy.com
> Subject: RE: at the lab exam
>
>
> All of these are great suggestions but does anyone have any ideas on the
> best way to make your diagram?
>
> I've heard it go both ways, are we allowed to bring colored pencils?
>
>
> TIA,
>
> -----Original Message-----
> From: EA Louie [mailto:elouie@yahoo.com]
> Sent: Thursday, January 10, 2002 3:33 PM
> To: ccielab@groupstudy.com
> Subject: Re: at the lab exam
>
>
> great tool - thanks for sharing it - I'll use it on Tuesday
>
> -e-
>
> ----- Original Message -----
> From: "Brian Dennis" <brian@5g.net>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, January 10, 2002 1:14 PM
> Subject: RE: at the lab exam
>
>
> > You also could make a sort of table to use while reading over the lab.
> Mark
> > down which devices need to be configured for each section. Then as you
> > do the sections mark off (i.e. circle) what devices have been done.
> > See
> below:
> >
> > Device R1 R2 R3 R4 R5 Cat5
> > Section
> > 1.1 x x
> > 1.2 x x x x
> > 1.3 x x
> > 2.1 x x
> >
> >
> > A student of mine came up with this idea and I thought it was pretty
> > cool.
> >
> > Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640
> > 5G Networks, Inc.
> > brian@5g.net
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > Mas Kato
> > Sent: Thursday, January 10, 2002 12:44 PM
> > To: yusman@mastersystem.co.id
> > Cc: ccielab@groupstudy.com
> > Subject: RE: at the lab exam
> >
> >
> > [demime could not interpret encoding binary - treating as plain text]
> > I would suggest reading through the whole assignment not just once,
> > but twice before charging in. On the first pass, look for issues and
> > order dependencies. On the second pass look for absolutes--absolute
> > values to be used, ranges to be covered, etc.--note these and then go
> > for it!
> >
> > Best of luck,
> >
> > Mas Kato
> > https://ecardfile.com/id/mkato
> >
> > > Yusman@mastersystem.co.id at the lab exam
> > > ccielab@groupstudy.comDate:
> Thu,
> > 10 Jan 2002 18:31:05 +0700
> > >Reply-To: Yusman@mastersystem.co.id
> > >
> > >For the first attempt lab exam, what is the best, read the whole lab
> > >instruction then do the lab or read per section task then do the
> > >test, without wasting the time
> > >
> > >Thanks for the opinion
> > ------------------------------------------------------------
> > Speed Racer's Official Virtual Pit Stop.
> > http://www.speedracerdsl.com/speedracer/
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:25 GMT-3