RE: wic-1t and wic-1t back to back serial configuration.

From: Jim Brown (Jim.Brown@xxxxxxxxxxxxx)
Date: Thu Jan 10 2002 - 18:51:01 GMT-3

Next message: Simon Hamilton-Wilkes: "RE: Caslow or CCIE Practial Studies guide."
Previous message: Nick Shah: "Re: Caslow or CCIE Practial Studies guide."
Maybe in reply to: Conte, Charles: "wic-1t and wic-1t back to back serial configuration."
Next in thread: Lupi, Guy: "RE: wic-1t and wic-1t back to back serial configuration."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

http://198.133.219.25/warp/public/471/75.html

The T1 CSU/DSU has a different pinout than the four-wire 56k CSU/DSU. The
connector for the T1 CSU/DSU is an RJ-48C. The connector for the four-wire
56k CSU/DSU is an RJ-48S. Both connectors are compatible with RJ-45 plugs.

T1 CSU/DSU Cross-Over Pinout From RJ 48C Pin To RJ-48C Pin
1 4
2 5
4 1
5 2

-----Original Message-----
From: Conte, Charles [mailto:Charles.Conte@nasd.com]
Sent: Thursday, January 10, 2002 2:33 PM
To: 'ccielab@groupstudy.com'
Subject: wic-1t and wic-1t back to back serial configuration.

Hello,

Just wanted to know the basic commands to get a wic-1t-csu/dsu
module to come up back to back. Sorry for this elementary question but I
couldn't find it on the web for some kind of reason. I believe I have the
pin outs of the cable right but if you don't mind please give me that
information too.

Thanks

Next message: Simon Hamilton-Wilkes: "RE: Caslow or CCIE Practial Studies guide."
Previous message: Nick Shah: "Re: Caslow or CCIE Practial Studies guide."
Maybe in reply to: Conte, Charles: "wic-1t and wic-1t back to back serial configuration."
Next in thread: Lupi, Guy: "RE: wic-1t and wic-1t back to back serial configuration."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:23 GMT-3