From: Gardner, Brent (Brent_Gardner@xxxxxxxxxxx)
Date: Wed Jan 09 2002 - 14:48:51 GMT-3
After trying at least ten versions of software, I opened a Cisco TAC case.
The conclusion was that ISIS is not supported on any version of 1600
software.
-----Original Message-----
From: DAN DORTON [mailto:DHSTS68@dhs.state.il.us]
Sent: Wednesday, January 09, 2002 10:33 AM
To: ccielab@groupstudy.com; tkc9789@hotmail.com
Subject: Re: ISIS on a 1601 & 1604
I don't see an enterprise feature set available for the 1601-1604
series.
>>> "tom cheung" <tkc9789@hotmail.com> 01/09/02 10:58AM >>>
You'll need enterprise feature set.
>From: "DAN DORTON" <DHSTS68@dhs.state.il.us>
>Reply-To: "DAN DORTON" <DHSTS68@dhs.state.il.us>
>To: <ccielab@groupstudy.com>
>Subject: ISIS on a 1601 & 1604
>Date: Wed, 09 Jan 2002 10:35:14 -0600
>
>Is it possible to run isis over a 1600 series?
>
>I have about the best IOS IP/IPX/AT/IBM/FW PLUS IPSEC 56 !!!
>
>It does not support clns routing!!!!
>
>Any ideas?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:21 GMT-3