Re: ISIS on a 1601 & 1604

From: tom cheung (tkc9789@xxxxxxxxxxx)
Date: Wed Jan 09 2002 - 13:58:48 GMT-3

Next message: Scott Hoover: "Re: why "Translating "Router"..." automatically whenever router starts"
Previous message: Frei Peter: "CCBootcamp Lab 20 Section Three Task 9 Access-list to block route s in range between 10.1.31.x - 10.1.255.x use as few commands as poss"
Maybe in reply to: DAN DORTON: "ISIS on a 1601 & 1604"
Next in thread: Church, Chuck: "RE: ISIS on a 1601 & 1604"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

You'll need enterprise feature set.

>From: "DAN DORTON" <DHSTS68@dhs.state.il.us>
>Reply-To: "DAN DORTON" <DHSTS68@dhs.state.il.us>
>To: <ccielab@groupstudy.com>
>Subject: ISIS on a 1601 & 1604
>Date: Wed, 09 Jan 2002 10:35:14 -0600
>
>Is it possible to run isis over a 1600 series?
>
>I have about the best IOS IP/IPX/AT/IBM/FW PLUS IPSEC 56 !!!
>
>It does not support clns routing!!!!
>
>Any ideas?

Next message: Scott Hoover: "Re: why "Translating "Router"..." automatically whenever router starts"
Previous message: Frei Peter: "CCBootcamp Lab 20 Section Three Task 9 Access-list to block route s in range between 10.1.31.x - 10.1.255.x use as few commands as poss"
Maybe in reply to: DAN DORTON: "ISIS on a 1601 & 1604"
Next in thread: Church, Chuck: "RE: ISIS on a 1601 & 1604"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:21 GMT-3