From: Stephen C. Feldberg (scfeldberg@xxxxxxxxxxx)
Date: Wed Jan 09 2002 - 12:42:16 GMT-3
r2#sh run
!
interface Ethernet0
ip address 192.168.1.1 255.255.2
no ip directed-broadcast
no keepalive
!
interface Serial0
no ip address
no ip directed-broadcast
encapsulation frame-relay
no ip mroute-cache
ntp broadcast client
no fair-queue
!
IOS will not show default parameters in the running-config. Try
r2#sh int s0
Serial0 is up, line protocol is up
Hardware is HD64570
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY, loopback not set
Keepalive set (10 sec) *******
<snip>
you will see that the keepalives are still set for 10 seconds on S0
Steve
----- Original Message -----
From: "Wen Jia Yang" <tonyblair@etang.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, January 09, 2002 1:30 AM
Subject: hi,pls help,about keepalive set on the interface
> Hi,dear group members:
> when I issue write erase and reload
> without saving config
> then after restart,I issued
> confi t
> int e0
> no keep
>
> then after I run a show int s0
> I found the keepalive value(default is 10 seconds)has been erased too.
>
> But I didn't use that command on the serial interface,I just do that on my
ethernet interface.
>
> the router model is a 2514,I just used ethernet0
>
> anyone offer a hand?Thanks in advance.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:21 GMT-3